This guide provides a detailed, step-by-step process on how to install and configure a Hikvision Network Video Recorder (NVR) system, and set it up for remote viewing on a mobile device.
Step 1: Hardware Connection & Readiness
NVR Connection: First, connect the NVR to your router or network switch with a network cable to ensure it has internet access.
Camera Connection: Connect the IP cameras to the NVR's PoE ports using network cables. The NVR will provide power to the cameras through these ports, eliminating the need for separate power adapters.
Monitor Connection: Use an HDMI or VGA cable to connect the NVR to a monitor or TV for local configuration.
Step 2: NVR Initial Configuration
First Startup: After powering on the NVR, follow the on-screen wizard to select the language and set up an administrator password for the NVR.
Login & Security: For convenient and quick access, you can create a login pattern.
Basic Settings: Configure the correct time zone to ensure accurate timestamps on your video recordings.
Network Settings: Unless you have specific requirements, keep the default DHCP settings to allow the NVR to automatically obtain an IP address.
Step 3: Mobile Remote Viewing Setup
Enable Hik-Connect: In the NVR's settings menu, find and enable the Hik-Connect service. You will need to agree to the terms of service and create a verification code.
Mobile App Preparation: Download and install the Hik-Connect App on your mobile device. Once installed, register and log in to your personal account.
Step 4: Adding the Device to the Mobile App
Add Device: Open the mobile app, select "Add Device," and then scan the QR code displayed on the NVR's monitor interface.
Finalize Setup: Follow the app's prompts to name your device. Once successfully added, you can start viewing the live footage from all your cameras on your phone.
For a more detailed installation guide, you can watch the video here: