Products

This TP-Link VIGI solar kit is a fully off-grid 4G surveillance solution: the VIGI C540-4G 4MP full-colour pan-tilt camera paired with the VIGI SP6020 intelligent solar power system (a 60 W solar panel and a 20.8 Ah lithium battery). It needs no mains power and no fixed internet — the camera runs on solar and connects over the 4G mobile network using your own SIM, so it suits farms, building sites, remote gates and any spot beyond reach of power and Wi-Fi. The camera pans and tilts to cover a wide area with records in full colour, and has two-way audio with active deterrence.

Kit includes
- 1 × VIGI C540-4G 4MP full-colour 4G pan-tilt network camera, IP66
- 1 × VIGI SP6020 solar power system: 60 W panel + 20.8 Ah / 10.8 V lithium battery
- Intelligent auxiliary heating, six-position angle adjustment, 3 × DC output ports
- 4G needs a Nano SIM (not included); microSD up to 256 GB (not included)
- 3-year warranty and local support

The TP-Link VIGI SP6030 is an intelligent solar power supply that runs a VIGI 4G camera or other 12 V DC device off-grid, with no mains power and no network cabling. It pairs a 60 W solar panel with a 31.2 Ah / 10.8 V lithium battery and an MPPT charge controller, delivering power through three 5.5 mm DC outputs (around 12 V, 2 A each). It does not supply PoE - it powers DC devices such as the VIGI C540-4G 4G camera, outdoor access points, wireless bridges and 4G routers. IP66-rated with intelligent battery heating for cold conditions, it is a compact off-grid option for Australian sites.

Key points
- 60 W solar panel with MPPT charging and a 31.2 Ah / 10.8 V lithium battery
- Three 5.5 mm DC outputs (about 12 V, 2 A each) - powers DC devices, not PoE
- Designed for VIGI 4G cameras such as the C540-4G: 4G for video, solar DC for power
- Same 31.2 Ah battery as the SP9030 in a smaller, lighter 60 W package
- Intelligent auxiliary battery heating; operates -30 C to 60 C; IP66 weatherproof
- Manual tilt 5 to 55 degrees; VIGI app for battery level, load stats and remote reboot

The TP-Link VIGI SP9030 is an intelligent solar power supply that runs a VIGI 4G camera or other 12 V DC device off-grid, with no mains power and no network cabling. It pairs a 90 W solar panel with a 31.2 Ah / 10.8 V lithium battery and an MPPT charge controller, and delivers power through three 5.5 mm DC outputs (around 12 V, 2 A each). It does not supply PoE - it powers DC devices such as the VIGI C540-4G 4G camera, outdoor access points, wireless bridges and 4G routers. IP66-rated with intelligent battery heating for cold conditions, it is built for remote Australian sites.

Key points
- 90 W solar panel with MPPT charging and a 31.2 Ah / 10.8 V lithium battery
- Three 5.5 mm DC outputs (about 12 V, 2 A each) - powers DC devices, not PoE
- Designed for VIGI 4G cameras such as the C540-4G: 4G for video, solar DC for power
- Up to about 10 consecutive rainy days running a single 4G camera (weather dependent)
- Intelligent auxiliary battery heating; operates -30 C to 60 C; IP66 weatherproof
- Manual tilt 5 to 55 degrees; VIGI app for battery level, load stats and remote reboot

Connect and power up to four security cameras through a single cable for an easy-to-install, high-definition business surveillance system.

The TP-Link VIGI VJB-240 is an aluminium wall-mount bracket that extends a VIGI dome, turret or fisheye camera out from a wall and routes the cable neatly through the arm. It suits most VIGI cameras (check the VIGI accessory compatibility list for your model), has a weatherproof VIGI-white finish, and gives a camera a clean stand-off mount on eaves, soffits and walls where a flush mount will not give the right angle or cable path.

Key points
- Wall-mount arm bracket for VIGI dome, turret and fisheye cameras
- Compatible with most VIGI cameras - check the VIGI accessory compatibility list
- Routes the camera cable through the arm for a tidy, weather-protected install
- Aluminium alloy and SGCC steel in VIGI white; weatherproof for outdoor use
- Stands a camera off a wall to set the viewing angle and clear the eave
- About 533 g; 181 x 134 x 59 mm; supplied with mounting accessories

The TP-Link VIGI VJB-300 is a round aluminium junction box that mounts behind a VIGI turret or dome camera to hide the cable join and connectors. It is compatible with all VIGI cameras, has a weatherproof housing for indoor or outdoor use, and fits on a wall or ceiling. The box finishes a camera install neatly and keeps the RJ45 plug, waterproof gland and any spare cable tucked out of sight and out of the weather.

Key points
- Junction box for VIGI turret and dome cameras; compatible with all VIGI cameras
- Aluminium alloy body in VIGI white; weatherproof for indoor or outdoor use
- Hides the cable join, RJ45 plug and waterproof gland behind the camera
- Mounts on a wall or ceiling; supplied with mounting and waterproof accessories
- Round form factor, 125 mm diameter; about 364 g
- Genuine TP-Link stock with a 3-year warranty

This is the TP-Link VIGI NK4P-T4425-2T official kit: four VIGI C445 4MP full-colour turret cameras, a 4-channel VIGI NVR1004H-4P PoE+ network video recorder and a pre-installed 2TB surveillance hard drive — a true plug-and-play system out of the box. Each camera records in full colour around the clock to about 30 metres down to 0.005 lux, classifies people and vehicles to cut false alerts, and has a built-in microphone and speaker for and a flashing-light deterrent. The PoE+ NVR powers and connects all four cameras over a single cable each, and recording starts the moment it is powered on.

Kit includes
- 4 × VIGI C445 4MP full-colour turret cameras (2.8 mm), IP67
- 1 × VIGI NVR1004H-4P 4-channel PoE+ network video recorder
- 1 × 2TB surveillance-grade hard drive, pre-installed
- flashing-light deterrence and human/vehicle AI on every camera
- NDAA compliant; 3-year warranty and local support

The RSRDM Universal Roller Door Reed Switch is a heavy-duty wired magnetic contact for monitoring roller shutters, garage doors and large commercial doors. It is a normally closed (NC) switch with a wide operating gap and armoured leads, and wires into a zone on any standard hardwired alarm panel.

Key points
- Heavy-duty wired reed switch for roller shutters and garage doors
- Normally closed (NC) output for any standard hardwired alarm zone
- Wide operating gap (around 50-60 mm) to suit large moving doors
- Metal alloy housing with a nickel-plated neodymium magnet
- 480 mm stainless-steel armoured leads (22 AWG) to protect the wiring
- Wired contact (not a wireless device); suits commercial and industrial doors