All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Hikvision Alarm
Hikvision AX PRO Series DS-PDP15P-EG2-WB Wireless PIR Detector
The Hikvision DS-PDP15P-EG2-WB is a wireless indoor PIR motion detector for AX PRO alarm systems. It watches a room for human movement across a wide 85.9 degree field up to 15m, and a Pet mode lets it ignore animals up to 30kg so the alarm is not tripped by the family dog or cat.
At a glance
- Passive infrared detection, 15m range, 85.9 degree angle, 52 detection zones
- Pet immunity up to 30kg when the Pet sensitivity mode is selected
- SEC smart environmental control with 3D optics and digital temperature compensation
- Tri-X two-way wireless on 433MHz, up to 1.2km open-air, AES-128 with frequency hopping
- One CR123A battery, up to 5 years; front and rear tamper; indoor wall mount at 1.8-2.4m
Hikvision AX PRO Series DS-PDMCK-EG2-WB Wireless Magnet Shock Detector
The Hikvision DS-PDMCK-EG2-WB is a wireless magnet, shock and tilt detector for Hikvision AX PRO alarm systems. Fitted to a door or window, it catches three kinds of attack: the door or window being opened, the surface being struck or drilled, and the leaf being tilted. It uses encrypted Tri-X wireless and includes two wired inputs to add more sensors.
Key points
- Magnetic opening contact (gap up to 43 mm) plus shock and tilt sensing
- Selectable shock sensitivity (high / normal / low); tilt up to 25 deg
- Two wired alarm inputs (NO / NC / impulse count) for extra sensors
- Tri-X two-way 433 MHz wireless with AES-128; up to 1 km free space
- Front and rear tamper; multi-colour status LED
- Up to 3 years' battery life (1 x CR123A); indoor use
Hikvision AX PRO Series DS-PDEBP2-EG2-WB Portable Wireless Dual Emergency Button
The Hikvision DS-PDEBP2-EG2-WB is a portable wireless dual panic button for AX PRO alarm systems. Pressing both buttons together sends an immediate distress alert to the hub and on to carers' phones through Hik-Connect, while the two-button design helps prevent the accidental presses that catch out single-button buttons in a pocket or bag.
At a glance
- Two-button press sends a wireless emergency / panic alert to an AX PRO hub
- Dual-button design plus accidental-press protection cuts false alerts
- Tri-X two-way wireless, up to 800m open-air, 433MHz, AES-128 with frequency hopping
- Wear on a lanyard or the optional wristband; red / green status LED
- One CR2032 battery, up to 3 years; IP54 splash resistant for everyday use
Hikvision AX PRO Series DS-PDEB2-EG2-WB Wall-mounted Wireless Emergency Dual Button
The Hikvision DS-PDEB2-EG2-WB is a wireless dual-button emergency device for Hikvision AX PRO alarm systems. Its two buttons must be pressed together to fire, which prevents accidental activation while still giving a fast way to call for medical or security help. It links to the AX PRO hub over encrypted Tri-X wireless and runs for years on one battery.
Key points
- Two-button design: a deliberate two-press triggers the alarm (anti-false)
- Immediate medical / security emergency alert to the AX PRO system
- Tri-X two-way 433 MHz wireless with AES-128 encryption
- Up to 800 m range in free space; frequency hopping
- Front and rear tamper protection; up to 3 years (1 x CR2450)
- Indoor wall/surface mount; green keymat for medical use
Hikvision Ax Pro DS-PDCL12-EG2-WB Wireless 360 Degree PIR Detector
The Hikvision DS-PDCL12-EG2-WB is a wireless 360-degree ceiling PIR detector for the AX PRO alarm system. Mounted overhead, its circular lens covers a whole room out to 12 metres with no blind corners. It uses Tri-X two-way wireless to the hub, runs up to five years on one battery, and is for indoor ceiling mounting.
At a glance
- 360-degree PIR coverage, 12m range, 172 detection zones
- Tri-X two-way wireless (433MHz, AES-128, frequency hopping), up to 1km open-air
- Battery powered (1 x CR123A), up to 5 years standby
- Indoor ceiling mount, 2.4m to 4m mounting height
- Front and rear tamper protection; configured in the Hik-Connect app
Hikvision AX PRO DS-PDB-IN-Ceiling bracket for PIR
The Hikvision DS-PDB-IN-Ceiling is a ceiling-mount bracket for Hikvision AX PRO indoor PIR detectors. It lets you mount a wall-pattern detector overhead and angle it where you need it, with a ±50° horizontal adjustment, in a compact lightweight ABS housing. It is an indoor accessory and does not include a detector.
Key points
- Ceiling-mount bracket for Hikvision AX PRO indoor PIR detectors
- ±50° horizontal adjustment to aim the detector
- Lightweight, durable ABS construction
- Compact 41 x 46 x 32 mm; weighs only 8 g
- Indoor use only; detector supplied separately
Hikvision DS-PDSKM-VG3 Wired Seismic Shock Detector
The Hikvision DS-PDSKM-VG3 is a wired seismic detector that uses a G-sensor to detect shock. It provides adjustable sensitivity, digital background-noise filtering and a normally closed alarm output. The die-cast housing has an IK10 impact rating and is intended for indoor installation.
Hikvision DS-PM2-P PSTN Alarm Communication Module
The Hikvision DS-PM2-P is a PSTN communication module for compatible AX Hybrid Pro control panels. It provides telephone-line alarm communication using Contact ID. A suitable telephone service and alarm receiving arrangement are required.
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Security Cameras
Add cameras alongside your alarm system
