All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Products
Hikvision DS-PR1-WB AX Pro Wireless Repeater
The Hikvision DS-PR1-WB is a wireless repeater for Hikvision AX PRO alarm systems. It relays the 433 MHz two-way signal between the control panel and distant detectors, so devices in a far corner, a detached building or behind dense walls stay reliably connected. It is mains powered with a built-in battery for backup, and supports PIRCAM image-verification detectors.
Key points
- Extends AX PRO 433 MHz two-way wireless range, up to 800 m open area
- Supports PIRCAM image-verification detectors
- 433 MHz two-way wireless with AES-128 encryption; auto-pairing
- Mains powered (100-240 VAC) with built-in Li battery
- Up to ~35 hours' battery backup at normal temperature
- Three status LEDs; front and rear tamper; wall mount
Hikvision DS-PS1-B AX Hybrid Series, Wired External Siren Sounder, IP54, 105DB
The Hikvision DS-PS1-B is a wired external siren sounder from the AX Hybrid range, combining a loud 105 dB sounder with a high-visibility LED strobe to warn and deter when your alarm activates. It wires directly to your control panel and is powered from it, so there is no battery to maintain, and the sound and strobe can be set up to operate separately.
Key points
- Loud 105 dB sounder (measured at 30 cm) with LED strobe
- Wired to and powered from the alarm panel (8-16 VDC, no battery)
- Sound and LED strobe are individually configurable
- Red or blue strobe options to suit the installation
- IP54 splash-resistant PC+ABS housing for sheltered outdoor use
- Front tamper protection; 140 x 134 x 33 mm, 185 g
Hikvision DS-PS1-I-WB Wireless Indoor Siren to suit AX Pro Hub
The Hikvision DS-PS1-I-WB is a wireless indoor siren for AX PRO alarm systems. It makes alarm events and system prompts clearly audible inside the property, with a loud adjustable sounder and LED flash - and because it is wireless, you can place it where it is heard best without running siren cable.
At a glance
- Indoor wireless sounder for Hikvision AX PRO hubs, 90 to 110dB adjustable
- 433MHz two-way communication, up to 900m open-air
- Configurable prompt sounds for entry/exit, arming and alarm events
- Blue/red LED flash and clear status indication
- Up to 3-year battery, max 3 indoor sounders per AX PRO hub
Hikvision DS-PS403I-WB Indoor Intercom Sounder
The Hikvision DS-PS403I-WB is a white wireless indoor sounder with full-duplex audio for a compatible alarm installation. It combines acoustic and LED indications with an adjustable alarm output up to 105 dB at 1 m; intercom output reaches 85 dB at 1 m. It uses 433 MHz CAM-X wireless communication and supports four CR123A batteries or a 12 VDC supply. Match the alarm system, audio service and power arrangement before installation. The open-area radio distance is not a guarantee of indoor coverage.
Hikvision DS-PSG-WO-433 Wireless External Siren
The Hikvision DS-PSG-WO-433 is a wireless outdoor siren for Hikvision Axiom and wireless alarm hubs. It delivers a powerful 110dB warning and a flashing blue strobe outside the property, with three selectable alarm tones and adjustable volume - a clear deterrent that installs without running siren cable.
At a glance
- 110dB outdoor siren with flashing blue strobe for strong deterrence
- Three alarm tones: fire, intrusion and panic, with low/medium/high volume
- 433MHz two-way wireless with AES-128, up to 800m open-air
- IP65 weatherproof, -25 to 60 degrees C, front and rear tamper
- 4 x CR123A batteries up to 5 years, or 12 VDC - for Hikvision Axiom / wireless hubs
Hikvision DS-PT-M1 Ax Pro Mifare Tag
The Hikvision DS-PT-M1 is a compact 13.56 MHz Mifare contactless tag for Hikvision AX PRO wireless alarm systems. Tap it on the control panel's built-in tag reader or an AX PRO keypad to arm or disarm without entering a code — ideal for family members or staff who do not need full app access.
Key points
- 13.56 MHz Mifare contactless tag for Hikvision AX PRO systems
- Tap to arm or disarm at the panel's tag reader or an AX PRO keypad
- 1024 × 8 bit EEPROM (16 sectors), approx. 10-year data retention
- Durable PVC / ABS body, 41 × 32 × 3.5 mm
- Up to 48 tags per AX PRO panel; available in white or black
Hikvision DS-PT1 Wireless Mifare Tag Reader
The Hikvision DS-PT1-WE is a wireless Mifare tag reader for Hikvision AX PRO alarm systems, operating on the 868MHz band. Mount it by a door and users arm or disarm the alarm with a quick swipe of a Mifare tag - no PIN to remember - making everyday operation faster at busy entry points.
At a glance
- Wireless Mifare tag reader for arming and disarming an AX PRO alarm
- 868MHz two-way wireless - must match your AX PRO hub's RF band
- AES-128 encryption and clear multi-colour LED feedback
- Stay arm / away arm / disarm by area, plus patrol tag check-in
- Front and rear tamper, 3 x AA batteries, up to 2 years standby
Hikvision DS-PT1-WB Ax Pro Wireless Mifare Tag Reader
The Hikvision DS-PT1-WB is a wireless Mifare tag reader for Hikvision AX PRO alarm systems, operating on the 433MHz band. Fit it beside a door and users arm or disarm the alarm with a quick swipe of a Mifare tag - no PIN to remember - making everyday control faster at busy entry points.
At a glance
- Wireless Mifare tag reader for arming and disarming an AX PRO alarm
- 433MHz two-way wireless - must match your AX PRO hub's RF band
- AES-128 encryption and clear multi-colour LED feedback
- Up to 900m open-air range; front and rear tamper protection
- 3 x AA batteries, up to 2 years standby, slim 75 x 124 x 21 mm
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Shop by Brand
Pick your preferred manufacturer ecosystem
Shop by Category
Cameras, recorders, kits and accessories
