All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Products
Hikvision DS-PDMCX-E-WB Ax Pro Wireless Outdoor Reed Switch, Large, IP66 External Magnet Detector
The Hikvision DS-PDMCX-E-WB is a large wireless outdoor magnetic contact (reed switch) for AX PRO alarm systems. With an IP66 housing, a big external magnet and a generous 76mm gap, it brings open/close detection to gates, roller doors, sheds and other outdoor openings where an indoor contact will not cope.
At a glance
- Wireless outdoor open/close detection for gates, roller doors and sheds
- IP66 weatherproof, UV-stable housing; -20 to 60°C operation
- Large external magnet with up to 76mm detection gap for misaligned or wide openings
- Tri-X two-way wireless to an AX PRO hub, up to 1km open-air, AES-128 with frequency hopping
- One CR123A battery, up to 5 years; front and rear tamper; alarm input (NC / NO / impulse)
Hikvision DS-PDP18-EG2 AX Hybrid Series Wired internal 18m PIR detector
The Hikvision DS-PDP18-EG2 is a wired indoor PIR motion detector from the AX Hybrid range, giving 18 metres of volumetric coverage from a slim, unobtrusive housing. It uses a dual-element infrared sensor and a 3D Fresnel lens to detect a moving intruder accurately while ignoring everyday nuisances, and its selectable end-of-line resistors let it wire into almost any hardwired or hybrid alarm panel.
Key points
- 18 m volumetric coverage at an 85.9° detection angle
- Dual-element PIR sensor with 3D Fresnel lens optics
- Creep-zone protection covers the blind spot directly below the unit
- Sealed optical chamber resists insects and false triggers
- Selectable EOL resistors (1K/2K2/4K7/5K6/8K2) suit most panels
- 9-16 VDC wired power with reverse-polarity protection
- Optional pet mask for immunity up to 10 kg
Hikvision DS-PDPC12P-EG2 Wired PIRCAM detector
The Hikvision DS-PDPC12P-EG2 is a wired PIRCAM detector for AX Hybrid Pro alarm systems. It pairs passive infrared motion detection with a built-in camera that captures JPEG snapshots when the alarm triggers, so you or a monitoring centre can confirm what set it off - turning a bare motion alert into a verified event.
At a glance
- PIR motion + built-in camera for image verification (JPEG snapshots on alarm)
- 12m range / 85.9° / 52 detection zones; up to 30kg pet immunity
- 12m infrared fill light with polarising IR lens for clearer low-light images
- Speed-X wired bus to the panel (up to 1km), AES-128 encrypted; 9-16VDC
- Front and rear tamper; indoor wall mount 1.8-2.4m; Hik-Connect app set-up
Hikvision DS-PDSK-P AX Hybrid Series Wired Shock Detector
The Hikvision DS-PDSK-P is a wired shock detector for AX Hybrid Pro alarm systems. Fitted directly to a door, window, wall or safe, it senses the vibration of drilling, levering or hammering and raises the alarm during a forced-entry attempt - before an intruder actually gets inside.
At a glance
- Shock sensor detects forced-entry vibration on the protected surface
- Adjustable sensitivity via potentiometer, with gross-attack override
- Advanced digital background-noise filter to reduce false alarms
- Wired NC alarm output, front tamper, blue LED indicator
- 9-16 VDC (typically 12 VDC), 30mA, indoor use
Hikvision DS-PDSKM-VG3 Wired Seismic Shock Detector
The Hikvision DS-PDSKM-VG3 is a wired seismic detector that uses a G-sensor to detect shock. It provides adjustable sensitivity, digital background-noise filtering and a normally closed alarm output. The die-cast housing has an IK10 impact rating and is intended for indoor installation.
Hikvision DS-PDSMK-4BAR AX PRO WIRED Smoke Detector
The Hikvision DS-PDSMK-4BAR is a wired 4-wire photoelectric smoke detector that adds early fire warning to a 12 VDC intrusion or fire alarm system. When smoke enters its sensing chamber, it raises a built-in sounder and signals the connected alarm panel, so an emerging fire is flagged locally and remotely.
At a glance
- Photoelectric smoke sensing for early, low-nuisance fire detection
- 4-wire conventional connection to 12 VDC alarm panels
- Built-in high-output sounder, approximately 85dB at 3m
- Normally Open (NO) or Normally Closed (NC) relay output
- Dual red LEDs with 360-degree visibility, low-profile ceiling mount
Hikvision DS-PDSMK-S-WB Ax Pro Wireless Photoelectric Smoke Sensor Detector
The Hikvision DS-PDSMK-S-WB is a wireless photoelectric smoke detector for Hikvision AX PRO alarm systems. It gives early warning of a fire with a photoelectric sensing chamber and a built-in 85 dB sounder, while also alerting your AX PRO system and your phone so you are warned whether you are home or away. A sealed 10-year battery means a decade of protection with no recharging.
Key points
- Photoelectric smoke sensing for early fire warning
- Built-in sounder, 85 dB or more at 3 m
- Two-way 433 MHz wireless with AES-128 encryption
- Range up to 800 m in free space
- Sealed 10-year battery (non-replaceable CR17450)
- Ceiling mount; indoor use; red alarm LED
Hikvision DS-PDTPH-E-WB Ax Pro Wireless Temperature and Humidity Sensor
The Hikvision DS-PDTPH-E-WB is a wireless temperature and humidity sensor for AX PRO alarm systems. It keeps watch on indoor conditions and sends an alert through Hik-Connect when temperature or humidity drifts outside the range you set, so problems in a server room, cellar, cool room or store room are caught early.
At a glance
- Wireless temperature and humidity monitoring with threshold alerts via Hik-Connect
- 2.7-inch on-screen display shows live readings
- -10 to 55°C standalone, or -35 to 99°C with the included external probe
- Tri-X two-way wireless, up to 800m open-air, 433MHz, AES-128 with frequency hopping
- Two AAA batteries, up to 2 years; front and rear tamper; indoor wall mount
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Shop by Brand
Pick your preferred manufacturer ecosystem
Shop by Category
Cameras, recorders, kits and accessories
