Hikvision DS-PM1-O4H-H AX Hybrid Pro 4-Way Output Module to suit Hardwired Alarm Controller
Skip to product information
1
/
of
1
Vendor:
Hikvision
Hikvision DS-PM1-O4H-H AX Hybrid Pro 4-Way Output Module to suit Hardwired Alarm Controller
SKU: DS-PMA-1-1
Description
The Hikvision DS-PM1-O4H-H is a wired 4-way power output module for AX Hybrid Pro hardwired alarm controllers. It gives the panel four high-current relays that can switch mains-powered devices - sirens, strobes, lighting circuits, gates and shutters - on command over the Speed-X bus, turning an alarm event into real-world action.
At a glance
- Four onboard power relays, each rated to switch up to 16A
- Connects to a 100-240 VAC source and opens/closes circuits on command
- Controlled by the AX Hybrid Pro panel over the Speed-X bus
- Cascade support: 1 uplink and 1 downlink Speed-X port for more expanders
- Front and rear tamper, plastic enclosure, mains wiring by a licensed electrician
Regular price
$74.65 AUD
Sale price
$74.65 AUD
Regular price
$95.00 AUD
Sale
21.42%
$20.35 AUD
(21.42%)
Delivery, warranty & returns · 3-year warranty · shipped from Australian stock
- Tracked delivery on every order. The tracking number is emailed as soon as it ships.
- Metro delivery: 2–4 business days. Regional areas may take longer. Free standard shipping over $300, flat $25 under.
- 3-year warranty on cameras and recorders, back-to-base, plus your Australian Consumer Law rights.
- 30-day returns on unopened items. Faulty on arrival? We cover return shipping.
- Genuine Australian stock. Never grey imports. Prices include GST.
In stock
No reviews
Hikvision DS-PM1-O4H-H AX Hybrid Pro 4-Way Output Module to suit Hardwired Alarm Controller
1
/
of
1
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
01Overview
What the DS-PMA-1-1 is
The Hikvision DS-PM1-O4H-H is a wired 4-way power output module (also listed under part DS-PMA-1-1) for the AX Hybrid Pro hardwired alarm platform. While the panel's own outputs handle low-current signalling, this module adds four high-current relays that can directly switch mains-powered equipment, so an alarm or automation event can drive real loads such as sirens, strobe beacons, lighting circuits, electric gates and roller shutters.
Each of the four relays can switch a circuit fed from a 100-240 VAC source, rated up to 16A per relay, and the module opens or closes those circuits on command from the AX Hybrid Pro control panel over the Speed-X bus. It supports cascade mode through one uplink and one downlink Speed-X port, so several expanders can be chained from a single controller for larger output requirements. Front and rear tamper switches and a power/fault indicator support reliable, supervised operation.
The module's own logic is powered at 9 to 24 VDC over the bus, it measures 110 x 155 x 32.5 mm in a plastic enclosure, and operates from -10 to 40 degrees C. Because each relay switches mains voltage, all 100-240 VAC wiring must be carried out by a licensed electrician in line with local rules. Note the related DS-PM1-O4L-H is a low-current version (5A, 6-30V) for lighter loads. This module is built for AX Hybrid Pro controllers such as the DS-PHA64-LP/NP.
02Engineering
DS-PMA-1-1 specifications
- Four onboard power relays each switch a 100-240 VAC circuit rated up to 16A for real mains loads.
- Opens and closes circuits on command from the AX Hybrid Pro panel over the wired Speed-X bus.
- Drives sirens, strobes, lighting circuits, electric gates and roller shutters from alarm or automation events.
- Cascade support with 1 uplink and 1 downlink Speed-X port chains several expanders from one controller.
- Module logic powered at 9-24 VDC over the bus; front and rear tamper for supervised security.
- 110 x 155 x 32.5 mm plastic enclosure, operating from -10 to 40 degrees C.
- High-current model - the DS-PM1-O4L-H low-current version (5A, 6-30V) suits lighter loads.
- Opens and closes circuits on command from the AX Hybrid Pro panel over the wired Speed-X bus.
- Drives sirens, strobes, lighting circuits, electric gates and roller shutters from alarm or automation events.
- Cascade support with 1 uplink and 1 downlink Speed-X port chains several expanders from one controller.
- Module logic powered at 9-24 VDC over the bus; front and rear tamper for supervised security.
- 110 x 155 x 32.5 mm plastic enclosure, operating from -10 to 40 degrees C.
- High-current model - the DS-PM1-O4L-H low-current version (5A, 6-30V) suits lighter loads.
03Full datasheet
Detailed specifications
Event & Alarm
| Feature | Detail |
|---|---|
| Tamper-Proof | Support (front and rear) |
Interface
| Feature | Detail |
|---|---|
| Serial port | 1 TTL serial port |
| Bus | 2×Speed-X bus, 1 uplink for control panel connection and 1 downlink for next expander |
| LED Indicator | 1 for power, or fault |
General & Environment
| Feature | Detail |
|---|---|
| Power supply | 9 to 24 VDC, 1A |
| Power consumption | Maximum current 210 mA@12 VDC; Quiescent current 65 mA@12 VDC |
| Operation temperature | -10 °C to 40 °C |
| Operation humidity | 10% to 90% |
| Dimension(WxHxD) | 110 mm × 155 mm × 32.5 mm |
| Shell material | Plastic |
| Weight | 333.1 g |
| Event & Alarm — Tamper-Proof | Support (front and rear) |
|---|---|
| Interface — Serial port | 1 TTL serial port |
| Interface — Bus | 2×Speed-X bus, 1 uplink for control panel connection and 1 downlink for next expander |
| Interface — LED Indicator | 1 for power, or fault |
| General & Environment — Power supply | 9 to 24 VDC, 1A |
| General & Environment — Power consumption | Maximum current 210 mA@12 VDC; Quiescent current 65 mA@12 VDC |
| General & Environment — Operation temperature | -10 °C to 40 °C |
| General & Environment — Operation humidity | 10% to 90% |
| General & Environment — Dimension(WxHxD) | 110 mm × 155 mm × 32.5 mm |
| General & Environment — Shell material | Plastic |
| General & Environment — Weight | 333.1 g |
04Why choose this
Built for the way you actually use the DS-PMA-1-1
Panel-controlled outputs
The AX Hybrid Pro panel opens and closes each relay over the Speed-X bus as part of its programming.
Expandable by cascade
Uplink and downlink Speed-X ports chain several modules for larger output requirements.
Supervised and tamper-aware
Front and rear tamper plus status indication keep the module dependable and monitored.
05Where it fits
Right at home in these scenarios
Sirens and strobes
Switch mains-powered external sounders and strobe beacons when the alarm activates.
Lighting on alarm
Turn on lighting circuits to deter intruders or illuminate an area during an event.
Gates and shutters
Trigger electric gates or roller shutters from alarm or automation outputs.
Plant and automation
Control compatible mains equipment as part of a structured AX Hybrid Pro install.
06Setup
Installation & setup
-
01
Plan the outputs
Decide which loads each relay will switch and confirm the AX Hybrid Pro controller, such as the DS-PHA64-LP/NP.
-
02
Wire by an electrician
Have a licensed electrician wire the 100-240 VAC circuits to the relays in line with local regulations.
-
03
Connect the Speed-X bus
Connect the module to the panel over Speed-X, using the uplink and downlink ports for any cascaded modules.
-
04
Program and test
Map the outputs in the panel, then test each relay switches its load correctly on the chosen events.
08Questions
Frequently asked about the DS-PMA-1-1
Q.01
What is the DS-PM1-O4H-H used for?
It is a 4-way power output module that gives an AX Hybrid Pro alarm panel four high-current relays. These can switch mains-powered devices such as sirens, strobes, lighting, gates and shutters when the panel commands an output.
Q.02
How much current can each relay switch?
Each of the four relays can switch a circuit up to 16A, fed from a 100-240 VAC source, which is enough for many mains-powered alarm and automation loads.
Q.03
How does it connect to the panel?
It connects to the AX Hybrid Pro control panel over the wired Speed-X bus. The panel then opens or closes each relay on command as part of its output programming.
Q.04
Can I cascade more than one module?
Yes. It supports cascade mode with one uplink and one downlink Speed-X port, so multiple expanders can be chained from a single AX Hybrid Pro controller when more outputs are needed.
Q.05
Does it switch mains voltage, and who should wire it?
Yes, each relay switches 100-240 VAC. Because mains voltage is involved, all power wiring must be carried out by a licensed electrician in accordance with local electrical regulations.
Q.06
What is the difference from the DS-PM1-O4L-H?
The DS-PM1-O4H-H is the high-current version, switching up to 16A. The DS-PM1-O4L-H is a low-current version rated 5A at 6-30V, suited to lighter loads and low-voltage switching.
Q.07
Which panels does it work with?
It is designed for Hikvision AX Hybrid Pro hardwired alarm controllers such as the DS-PHA64-LP/NP, connecting over the Speed-X bus.
Q.08
Why does the store SKU say DS-PMA-1-1?
This product is the Hikvision DS-PM1-O4H-H 4-way power output module; it is listed here under the part reference DS-PMA-1-1. The specifications and datasheet are for the DS-PM1-O4H-H.
Buying from Smarket
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
10Bundles
Recommended packages
Pair with an AX Hybrid Pro panel
This module is driven by a hardwired AX Hybrid Pro panel. Build the system around the DS-PHA64-LP/NP control panel, or start with the KIT-PHA64 AX Hybrid Pro kit.
Sound the alarm
Wire a relay to a mains sounder, or add the wired DS-PS1-B external siren for an external warning.
Add control and reporting
Control the system from the DS-PK1-LRT-HWB keypad and add cellular backup with the DS-PM2-S(AU) 3G/4G module.