Products

The Hikvision DS-PMA is a 3G/4G communication module for Hikvision AX Hybrid Pro hardwired alarm panels. It plugs into the panel and adds a cellular reporting path, so alarms and notifications can be sent over the mobile network - ideal where there is no phone line, or as a backup to a wired internet connection.

At a glance
- Adds 3G/4G cellular reporting to AX Hybrid Pro hardwired panels
- SIM card slot - a suitable SIM and mobile coverage are required
- Plug-in module design for a neat install inside the panel
- Use as a primary or backup reporting path
- Communication accessory only - panel and devices ordered separately

The Hikvision DS-PR1-WB is a wireless repeater for Hikvision AX PRO alarm systems. It relays the 433 MHz two-way signal between the control panel and distant detectors, so devices in a far corner, a detached building or behind dense walls stay reliably connected. It is mains powered with a built-in battery for backup, and supports PIRCAM image-verification detectors.

Key points
- Extends AX PRO 433 MHz two-way wireless range, up to 800 m open area
- Supports PIRCAM image-verification detectors
- 433 MHz two-way wireless with AES-128 encryption; auto-pairing
- Mains powered (100-240 VAC) with built-in Li battery
- Up to ~35 hours' battery backup at normal temperature
- Three status LEDs; front and rear tamper; wall mount

The Hikvision DS-PS1-B is a wired external siren sounder from the AX Hybrid range, combining a loud 105 dB sounder with a high-visibility LED strobe to warn and deter when your alarm activates. It wires directly to your control panel and is powered from it, so there is no battery to maintain, and the sound and strobe can be set up to operate separately.

Key points
- Loud 105 dB sounder (measured at 30 cm) with LED strobe
- Wired to and powered from the alarm panel (8-16 VDC, no battery)
- Sound and LED strobe are individually configurable
- Red or blue strobe options to suit the installation
- IP54 splash-resistant PC+ABS housing for sheltered outdoor use
- Front tamper protection; 140 x 134 x 33 mm, 185 g

The Hikvision DS-PS1-I-WB is a wireless indoor siren for AX PRO alarm systems. It makes alarm events and system prompts clearly audible inside the property, with a loud adjustable sounder and LED flash - and because it is wireless, you can place it where it is heard best without running siren cable.

At a glance
- Indoor wireless sounder for Hikvision AX PRO hubs, 90 to 110dB adjustable
- 433MHz two-way communication, up to 900m open-air
- Configurable prompt sounds for entry/exit, arming and alarm events
- Blue/red LED flash and clear status indication
- Up to 3-year battery, max 3 indoor sounders per AX PRO hub

The Hikvision DS-PSG-WO-433 is a wireless outdoor siren for Hikvision Axiom and wireless alarm hubs. It delivers a powerful 110dB warning and a flashing blue strobe outside the property, with three selectable alarm tones and adjustable volume - a clear deterrent that installs without running siren cable.

At a glance
- 110dB outdoor siren with flashing blue strobe for strong deterrence
- Three alarm tones: fire, intrusion and panic, with low/medium/high volume
- 433MHz two-way wireless with AES-128, up to 800m open-air
- IP65 weatherproof, -25 to 60 degrees C, front and rear tamper
- 4 x CR123A batteries up to 5 years, or 12 VDC - for Hikvision Axiom / wireless hubs

The Hikvision DS-PT-M1 is a compact 13.56 MHz Mifare contactless tag for Hikvision AX PRO wireless alarm systems. Tap it on the control panel's built-in tag reader or an AX PRO keypad to arm or disarm without entering a code — ideal for family members or staff who do not need full app access.

Key points
- 13.56 MHz Mifare contactless tag for Hikvision AX PRO systems
- Tap to arm or disarm at the panel's tag reader or an AX PRO keypad
- 1024 × 8 bit EEPROM (16 sectors), approx. 10-year data retention
- Durable PVC / ABS body, 41 × 32 × 3.5 mm
- Up to 48 tags per AX PRO panel; available in white or black

The Hikvision DS-PT1-WE is a wireless Mifare tag reader for Hikvision AX PRO alarm systems, operating on the 868MHz band. Mount it by a door and users arm or disarm the alarm with a quick swipe of a Mifare tag - no PIN to remember - making everyday operation faster at busy entry points.

At a glance
- Wireless Mifare tag reader for arming and disarming an AX PRO alarm
- 868MHz two-way wireless - must match your AX PRO hub's RF band
- AES-128 encryption and clear multi-colour LED feedback
- Stay arm / away arm / disarm by area, plus patrol tag check-in
- Front and rear tamper, 3 x AA batteries, up to 2 years standby

The Hikvision DS-PT1-WB is a wireless Mifare tag reader for Hikvision AX PRO alarm systems, operating on the 433MHz band. Fit it beside a door and users arm or disarm the alarm with a quick swipe of a Mifare tag - no PIN to remember - making everyday control faster at busy entry points.

At a glance
- Wireless Mifare tag reader for arming and disarming an AX PRO alarm
- 433MHz two-way wireless - must match your AX PRO hub's RF band
- AES-128 encryption and clear multi-colour LED feedback
- Up to 900m open-air range; front and rear tamper protection
- 3 x AA batteries, up to 2 years standby, slim 75 x 124 x 21 mm